Quickly and easily fertigate from any standard garden hose.
EZ-FLO is trusted by thousands of homeowners and commercial businesses across the world. The injection systems make your plants and landscapes grow more beautifully and are low cost, convenient, and super easy to use. The injectors connect directly to any standard garden hose spigot to fertigate via hose end nozzles, hose end sprinklers,and spray stake or drip systems. Other popular uses besides fertilizers are soil wetting agents, beneficial soil improvers, insect and critter repellants, bio stimulants, and more.
After initial setup, simply fill container with liquid or water soluble products and then fill with water to remove any air. Adjust the rate dial to your setting, open injector shutoffs and water supply. Your now fertigating. 4 dial settings 1000:1, 500:1, 250:1, and 100:1.
Pressure regulator required if over 50psi. Operating range: 2.5 to 35gpm, 5 psi to 50psi. Must be attached to a hose spigot or sprinkler line that has a hose vacuum breaker, anti-siphon, or back flow preventer installed. #305 back flow preventer is available for use with hose spigots.
- 2-1/2 gallon tank

- This product is covered under A.M. Leonard’s exclusive 30-Day Down to Earth Guarantee. Click Here for more Details.
- Trusted brand to thousands of users
- Simple to set up and operate
- Fertigate easily from any outdoor hose spigot
- Adjustable application rate dial
- For use with hose end nozzles, sprinklers, and drip/spray stake systems
The EZ Flo Automatic Fertilization System is an injection system that connects to any standard garden hose spigot to quickly and easily fertigate plants and landscapes using hose end nozzles, sprinklers, and drip/spray stake systems. It is also suitable for other uses like soil wetting agents, insect and critter repellants, bio stimulants, and more.
What are the operating dial settings of the EZ Flo Automatic Fertilization System?
The EZ Flo Automatic Fertilization System features 4 dial settings: 1000:1, 500:1, 250:1, and 100:1. Users can adjust the rate dial to their preferred setting, open injector shutoffs and water supply, and begin fertigating.
What is the recommended operating range for the EZ Flo Automatic Fertilization System?
The operating range for the EZ Flo Automatic Fertilization System is 2.5 to 35gpm, 5 psi to 50psi. A pressure regulator is required if the operating pressure is over 50psi.
What are the requirements for attaching the EZ Flo Automatic Fertilization System to an outdoor hose spigot?
The EZ Flo Automatic Fertilization System must be attached to a hose spigot or sprinkler line that has a hose vacuum breaker, anti-siphon, or backflow preventer installed. Users can also use the #305 backflow preventer for hose spigots.
- Instructions
- Installation & Operating Guide










Reviews
There are no reviews yet.